Datasheet

Required Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 33
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 2-10: DIMENSIONS – AC244023, AC224024
Target Pin 1 is located on
bottom side of header.
Dimensions are in inches
Top
1.800
0.150
1.150
0.425
Side
0.165 Typical
0.062
Typical
0.260
Typical
8-pin SIL Connector
(0.100 pin spacing)
See Appendix B. “Debug Header
Connections” for details.
-ICE
Device