Datasheet

PEP and Debug Header Specification
DS50001292W-page 22  2006-2015 Microchip Technology Inc.
AC162059, AC162070, AC162096
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
The -ICD devices on these headers are specifically designed to select a device without
the use of additional jumpers or switches.
These headers support 8- and 14-pin devices (see Figure 2-4.) For the AC162059 and
AC162070, there is an 8-pin and a 14-pin connector. For the AC162096, there is only
a 14-pin connector. (The 8-pin connector is not populated.) Use the 14-pin connector
for 8-pin devices, but make sure device pin 1 is placed at the 14-pin connector pin 1.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
AC Number -ICE/-ICD Device Board Assembly Number
AC162059 PIC16F505-ICD 02-01803
AC162070 PIC16F506-ICD
AC162096 PIC16F526-ICD