Datasheet

Required Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 21
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 2-3: DIMENSIONS – AC162053, AC162054
Target Pin 1 is located on
bottom side of header.
Dimensions are in inches
2.350
Top
0.150
0.150
0.750
J1
P1
1
Side
0.165 Typical
0.062 Typical
0.560
Typical
-ICE
Device
6-pin Modular Connector
See Appendix B. “Debug Header
Connections” for details.