Datasheet

PEP and Debug Header Specification
DS50001292W-page 20  2006-2015 Microchip Technology Inc.
AC162053, AC162054
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting different -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation – AC162053
For these headers, there are no jumpers/switches. The device with the most program
memory is always selected.
If PIC16F627A or PIC16F628A devices are selected for development in MPLAB X IDE,
the warning “Invalid target device ID” may be received in the build window. Ignore this
warning. The reason for the warning is that the PIC16F648A-ICD device supports
PIC16F648A, PIC16F627A and PIC16F628A, but only reports the device ID for the
PIC16F648A.
Header Setup and Operation – AC162054
This header supports one device (PIC16F716) so there are no jumpers or switches.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
AC Number -ICE/-ICD Device Board Assembly Number
AC162053 PIC16F648A-ICD 02-01695
AC162054 PIC16F716-ICD