Datasheet

PEP and Debug Header Specification
DS50001292W-page 18  2006-2015 Microchip Technology Inc.
AC162052, AC162055, AC162056, AC162057
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting various -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
For these headers, device peripherals need to be selected by setting jumper J1 to the
appropriate position. For AC162052 and AC162057, this will have the effect of
selecting the device.
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
AC Number -ICE/-ICD Device Board Assembly Number
AC162052 PIC16F676-ICD 02-01686
AC162055 PIC16F684-ICD
AC162056 PIC16F688-ICD
AC162057 PIC16F636-ICD
AC Number Jumper J1 Function Device Selected
AC162052 2-3 A/D Disabled PIC16F630
1-2 A/D Enabled PIC16F676
AC162055 Don’t care N/A PIC16F684
AC162056 Don’t care N/A PIC16F688
AC162057 2-3 PORTC, Comparator 2 Disabled PIC12F635
1-2 PORTC, Comparator 2 Enabled PIC16F636