Datasheet

Required Debug Headers
 2006-2015 Microchip Technology Inc. DS50001292W-page 17
Header Limitations
Sometimes a header device (-ICE/-ICD) has operational issues or errata. To determine
if a device on a header has limitations, see your hardware tool documentation.
Header Dimensions
The figure below lists the dimensions for the debug header. Dimensions are design
values in inches.
If the length and/or width of the debug header is too large a footprint for the target
board, consider using stand-offs, transition sockets or other extenders in the header
connection socket to raise the header above the target.
FIGURE 2-1: DIMENSIONS – AC162050, AC162058
Side
0.165 Typical
0.062 Typical
Dimensions are in inches
1.275
0.700
1.000
0.525
Target Pin 1 is located on
bottom side of header.
Top
0.560
Typical
J1
J2
P1
1
6-pin Modular Connector
See Appendix B. “Debug Header
Connections” for details.
-ICE
Device