Datasheet

PEP and Debug Header Specification
DS50001292W-page 16  2006-2015 Microchip Technology Inc.
AC162050, AC162058
Header Identification
The AC number is used for ordering the Processor Extension Pak, which contains the
debug header. However, this number is not on the header, as the board may be used
for multiple headers by inserting various -ICE/-ICD devices. To identify these headers,
use the following information.
Header Setup and Operation
For these headers, device peripherals need to be selected by setting jumper J1 to the
appropriate position. For AC162050, this will have the effect of selecting the device.
PIC16F648A 18 AC162053 PIC16F648A-ICD 5.5V
PIC16F676 14 AC162052 PIC16F676-ICD 5.5V
PIC16F677 20 AC162061 PIC16F690-ICD 5.5V
PIC16F684 14 AC162055 PIC16F684-ICD 5.5V
PIC16F685/687 20 AC162061 PIC16F690-ICD 5.5V
PIC16F688 14 AC162056 PIC16F688-ICD 5.5V
PIC16F689/690 20 AC162061 PIC16F690-ICD 5.5V
PIC16F716 18 AC162054 PIC16F716-ICD 5.5V
PIC16F785/HV785 20 AC162060 PIC16F785-ICD 5.5V
PIC16F1503
(1)
PIC16F1507
(1)
14
20
AC244051 PIC16F1509-ICE 5.5V
PIC16LF1503
(1)
PIC16LF1507
(1)
14
20
AC244052 PIC16LF1509-ICE 3.6V
PIC18F13K50
PIC18F14K50
20 AC244023 PIC18F14K50-ICE 5.5V
PIC18LF13K50
PIC18LF14K50
20 AC244024 PIC18LF14K50-ICE 3.6V,
2.75V
(2)
PIC24F04KA200
(1)
PIC24F04KA201
(1)
14
20
AC244028 PIC24F16KA102-ICE 3.6V
TABLE 1: REQUIRED DEBUG HEADERS BY DEVICE (CON’T)
Device Supported
by Debug Header
Pin Count
PEP* Part
Number
-ICE/-ICD Device on
Debug Header
V
DD Max
* PEP = Processor Extension Pak.
Note 1: Header optional for other devices, but required for this device.
Note 2: V
DDCORE Max
Note 3: Dual die
AC Number -ICE/-ICD Device Board Assembly Number
AC162050 PIC12F675-ICD 02-01662
AC162058 PIC12F683-ICD
AC Number Jumper J1 Function Device Selected
AC162050 2-3 A/D Disabled PIC12F629
1-2 A/D Enabled PIC12F675
AC162058 1-2 A/D Enabled PIC12F683