Datasheet

PEP and Debug Header Overview
 2006-2015 Microchip Technology Inc. DS50001292W-page 13
1.8 DEBUG HEADER SETUP FOR MPLAB X IDE
Follow these instructions to use the debug header:
1. Set up the debug header as specified in Section 1.7 “Debug Header Hardware
Setup”.
2. Begin creating a project for a device supported by your debug header using the
Projects wizard (File>New Project
). See MPLAB X IDE documentation for more
on Projects.
3. In one step of the wizard you will have an opportunity to specify the debug header
product number (AC######).
4. In another step you will specify the hardware (debug) tool to which your header
is attached.
5. Once the wizard is complete, write code for your project.
6. Select Debug>Debug Project
to run and debug your code.
Note: A debug header can only be used to debug (Debug menu), not to program
(Run menu). See Section 1.9.1 “Programming Details”.