Datasheet
DMX512A Controller & Receiver
Demonstration Operation
Controller
RGBW LED Not Used
LCD Displays
3 Digit Address of Specific Receiver LED: ‘000’
Toggle Modes: ‘C0’, ‘C1’, ‘C2’
Button 1-3 (S2-S4)
Sets Address of Specific Receiver LED
Only used while in C2 mode
Button 4 (S5) – Rotates through modes
C0 – ‘OFF’
C1 – Sends commands to all Receivers to Auto
rotate through RED, GREEN, BLUE, WHITE, and
custom color mix (slider not used)
C2 – Controls specific Receiver LED colors based
on Receiver address. Slider controlled dimming
of individual RED, GREEN, BLUE, WHITE LEDs
of the Receiver.
Example: Set Controller address display to ‘001’.
Slider controls the RED LED of Receiver ‘001’
Example: Set Controller address display to ‘002’.
Slider controls the GREEN LED of Receiver ‘001’
Example: Set Controller address display to ‘008’.
Slider controls the WHITE LED of Receiver ‘005’
1
1
2
Controller Receiver Receiver
2
Controller Receiver Receiver