Datasheet

DMX512A Controller & Receiver
Demonstration Setup
Program Controller
 Utilize PICkit3 to program Main Communication Board with
ControllerDemo.X.production.hex to create Controller
Program Receivers
 Utilize PICkit3 to program (2 or more) Main Communication
Boards with ReceiverDemo.X.production.hex to create
Receiver
Setup & Attach Adapters
 Set DMX512A Adapter Jumper Settings
 J4 – ON
 J5 – ON
 J6 – ON
 J7 – ON
 J8 – ON
 Insert DMX512A adapters to all Main Communication Boards
Connect Controller to Receivers
 Connect Main Communication Boards with DMX512A
adapters in a “Daisy Chain” configuration with either RJ45
patch cable or XLR5 barrel cables
 Note whether the board is Controller or Receiver
Provide Power
 Insert 9-12V DC power cord to Controller
 Note that power to Receivers is provided via cabling
“Phantom Power”
1
2
3
4
5
Controller Receiver Receiver
1
2
3
4
5