User manual

MPLAB PM3 Card Reference

9.3.1.1 SAVE

This options enables you to save an Environment to the MPLAB PM3 Card, your hard

drive or another location.

Select Programmer>Environment>Save

to open the Save Environment dialog

(Figure 9-3) and perform these steps:

FIGURE 9-3: SAVE ENVIRONMENT DIALOG

1. In the “Environment Name” field, type a name (maximum 127 characters) for the

Environment you wish to save.

2. If an SQTP file is specified for the device in the Programmer>Settings>SQTP

dialog, then the SQTP file name will appear in the “SQTP File” field. The file must

be generated and loaded into MPLAB IDE before saving the Environment. This

is a display-only field, type cannot be entered into this field.

3. In the optional “Misc. Files” field, click Browse or type the file name(s) to add files

you wish to save with the Environment. If typing the file name, the full path must

be specified. Multiple files must be separated by a comma. A maximum number

of 10 miscellaneous files (.txt, .hex, etc.) can be saved in an Environment.

4. In the optional Description field, type a brief description of the Environment.

5. Click Browse to open the Environment Destination window (Figure 9-4). MPLAB

PM3 must be enabled for the MPLAB PM3 Card to appear in the Environment

Destination window.