User manual

Installing MPLAB PM3

2.5.2 Selecting MPLAB PM3 as the Programmer

In addition to MPLAB PM3, the PRO MATE II and PICSTART Plus device programmers

are supported under MPLAB IDE. However, only one programmer can be used at a

time.

Select Programmer>Select Programmer>MPLAB PM3

to select MPLAB PM3 from the

list of available programmers (Figure 2-4). After MPLAB PM3 is selected:

• The Programmer menu changes to include the MPLAB PM3 Programmer Menu

and Settings.

• The MPLAB PM3 Toolbar is revealed.

• The name of the programmer appears on the status bar.

FIGURE 2-4: SELECT PROGRAMMER MENU