User manual

MPLAB

PM3 User’s Guide

1.4 MPLAB PM3 SYSTEM COMPONENTS

The MPLAB PM3 device programmer system consists of the following:

• MPLAB PM3 device programmer (see Figure 1-1)

• Module sockets

• RS-232 Interface cable to connect to any standard PC serial port

• USB Interface cable to connect to any standard PC USB port

•ICSP cable

• Power supply

• MPLAB IDE software – an Integrated Development Environment including a text

editor, project manager and simulator for debugging. Also included are the

MPASM assembler, MPLINK object linker and MPLIB object librarian.

FIGURE 1-1: MPLAB

PM3 DEVICE PROGRAMMER

1.5 MPLAB PM3 CE COMPLIANCE

The MPLAB PM3 device programmer is designed, tested and certified to meet the

Electromagnetic Compatibility requirements known as the CE compliance directives.

These standards, set by the European Union (EU) countries, include limiting radiated

emission, reducing susceptibility to radiated emission and reducing susceptibility to

Electrostatic Discharge (ESD).

Note: A complete line of socket modules is available. The socket modules may

be ordered separately for the devices that will be programmed.