User manual

MPLAB

PM3 User’s Guide

Information on using ICSP for a specific device is described in the device’s

programming specification. You can find programming specifications on the Microchip

web site.

A.4.2 ICSP VDD/VPP Operating Characteristics

Note: Since MPLAB PM3 has ICSP built-in, you cannot use the PRO MATE II

ICSP Socket Module (AC04004) and the MPLAB PM3-to-PRO MATE II

device adapter.

TABLE A-4: POWER VIA MPLAB

PM3

Parameter Value

VPP Range 9-14V in 125 mV steps

IPP Range 150 mA max

VDD Range 2-5.5V in 125 mV steps

IDD Range 500 mA max

Protection Over Voltage Shutdown

TABLE A-5: POWER VIA TARGET

Parameter Value

Ta r ge t V DD Range 2-5.5V

VPP Range 9-14V in 125 mV steps

IPP -150 mA max

Ta r ge t V DD Range 2-5.5V

Protection IPP Overcurrent Fuse, Over Voltage Shutdown

Note: The use of any cable (other material, length...) other than the one provided

with MPLAB PM3 unit may result in unreliable device programming.