User manual

MPLAB PM3 Card Reference

9.3.2.1 LIST FILES

This option enables all of the files in an Environment to be viewed so the files can be

reviewed before performing another action, such as loading, copying or deleting.

Select Programmer>MPLAB PM3 Card>List Files

to open the List Files window (see

example in Figure 9-11). Expand the directories to display all the files. Click OK or

Close after viewing the listing.

FIGURE 9-11: LIST FILES WINDOW

9.3.2.2 FORMAT

This option reformats MMC cards in the FAT16 format. If the card is not in FAT16

format, a warning message displays on the LCD screen:

MPLAB PM3 only supports FAT16.

Would you like to format now as FAT16?

DATA WILL BE DESTROYED!

Press <ENTER> to reformat a non-FAT16 card.

For FAT16 cards, with the MPLAB PM3 Card inserted in the programmer, select

Programmer>MPLAB PM3 Card>Format

to open the Format PM3 Card dialog

(Figure 9-12).

FIGURE 9-12: FORMAT PM3 CARD DIALOG

Click OK to continue formatting the MPLAB PM3 Card or click Cancel. When

formatting the MPLAB PM3 Card, all data is erased from the card.