Datasheet

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
DS70291G-page 308 © 2007-2012 Microchip Technology Inc.
REGISTER 24-2: CVRCON: COMPARATOR VOLTAGE REFERENCE CONTROL REGISTER
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 15 bit 8
R/W -0 R/W -0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
CVREN CVROE CVRR CVRSS CVR<3:0>
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-8 Unimplemented: Read as ‘0’
bit 7 CVREN: Comparator Voltage Reference Enable bit
1 =CV
REF circuit powered on
0 =CV
REF circuit powered down
bit 6 CVROE: Comparator V
REF Output Enable bit
1 =CV
REF voltage level is output on CVREF pin
0 =CVREF voltage level is disconnected from CVREF pin
bit 5 CVRR: Comparator VREF Range Selection bit
1 =CVRSRC range should be 0 to 0.625 CVRSRC with CVRSRC/24 step size
0 =CV
RSRC range should be 0.25 to 0.719 CVRSRC with CVRSRC/32 step size
bit 4 CVRSS: Comparator V
REF Source Selection bit
1 = Comparator reference source CV
RSRC = VREF+ – VREF-
0 = Comparator reference source CVRSRC = AVDD – AVSS
bit 3-0 CVR<3:0>: Comparator VREF Value Selection 0 ≤ CVR<3:0> ≤ 15 bits
When CVRR = 1:
CVREF = (CVR<3:0>/ 24) • (CVRSRC)
When CVRR = 0:
CVREF = 1/4 • (CVRSRC) + (CVR<3:0>/32) • (CVRSRC)