Datasheet

2009-2012 Microchip Technology Inc. DS70591E-page 1
dsPIC33FJ32GS406/606/608/610 and
dsPIC33FJ64GS406/606/608/610
Operating Conditions
3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
Core: 16-Bit dsPIC33F
Code-Efficient (C and Assembly) Architecture
Two 40-Bit Wide Accumulators
Single-Cycle (MAC/MPY) with Dual Data Fetch
Single-Cycle Mixed-Sign MUL plus Hardware Divide
32-Bit Multiply Support
Clock Management
±1% Internal Oscillator
Programmable PLLs and Oscillator Clock Sources
Fail-Safe Clock Monitor (FSCM)
Independent Watchdog Timer (WDT)
Fast Wake-up and Start-up
Power Management
Low-Power Management modes (Sleep, Idle, Doze)
Integrated Power-on Reset and Brown-out Reset
1.7 mA/MHz Dynamic Current (typical)
•50 µA I
PD Current (typical)
High-Speed PWM
Up to 9 PWM Pairs with Independent Timing
Dead Time for Rising and Falling Edges
1.04 ns PWM Resolution
PWM Support for:
- DC/DC, AC/DC, Inverters, PFC, Lighting
- BLDC, PMSM, ACIM, SRM
Programmable Fault Inputs
Flexible Trigger Configurations for ADC Conversions
Advanced Analog Features
High-Speed ADC module:
- 10-bit resolution with up to two Successive
Approximation Register (SAR) converters (up to
4 Msps)
- Up to 24 input channels grouped into 12
conversion pairs plus two voltage reference
monitoring inputs
- Dedicated result buffer for each analog channel
Flexible and Independent ADC Trigger Sources
Up to 4 High-Speed Comparators with Direct
Connection to the PWM module:
- 10-bit Digital-to-Analog Converter (DAC) for each
comparator
- DAC reference output
- Programmable references with 1024 voltage points
Timers/Output Compare/Input Capture
Six General Purpose Timers:
- Five 16-bit and up to two 32-bit timers/counters
Four Output Compare (OC) modules Configurable as
Timers/Counters
Quadrature Encoder Interface (QEI) module
Configurable as Timer/Counter
Four Input Capture (IC) modules
Communication Interfaces
Two UART modules (12.5 Mbps):
- With support for LIN/J2602 2.0 protocols and IrDA
®
Two 4-wire SPI modules (15 Mbps)
ECAN™ module (1 Mbaud) CAN 2.0B Support
•Two I
2
C™ modules (up to 1 Mbaud) with SMBus
Support
Direct Memory Access (DMA)
4-Channel DMA with User-Selectable Priority
Arbitration
UART, SPI, ECAN™, IC, OC and Timers
Input/Output
Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or
6 mA on 66 Pins
5V Tolerant Pins
Selectable Open-Drain and Pull-ups
29 External Interrupts
Qualification and Class B Support
AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
Class B Safety Library, IEC 60730, VDE Certified
Debugger Development Support
In-Circuit and In-Application Programming
Two Program and two Complex Data Breakpoints
IEEE 1149.2 Compatible (JTAG) Boundary Scan
Trace and Run-Time Watch
16-Bit Digital Signal Controllers with High-Speed PWM,
ADC and Comparators

Summary of content (456 pages)