Datasheet

 2009-2012 Microchip Technology Inc. DS70591E-page 369
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DC26d 122 135 mA -40°C
3.3V
40 MIPS
See Note 2 and 3, except PWM is
operating at 1/2 speed
(PTCON2 = 0x0001)
DC26a 123 135 mA +25°C
DC26b 124 135 mA +85°C
DC26c 125 135 mA +125°C
DC27d 107 120 mA -40°C
3.3V
40 MIPS
See Note 2 and 3, except PWM is
operating at 1/4 speed
(PTCON2 = 0x0002)
DC27a 108 120 mA +25°C
DC27b 109 120 mA +85°C
DC27c 110 120 mA +125°C
DC28d 88 100 mA -40°C
3.3V
40 MIPS
See Note 2 and 3, except PWM is
operating at 1/8 speed
(PTCON2 = 0x0003)
DC28a 89 100 mA +25°C
DC28b 89 100 mA +85°C
DC28c 89 100 mA +125°C
TABLE 27-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (IDD)
(2)
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all IDD measurements are as follows:
• Oscillator is configured in EC mode with PLL, OSC1 is driven with external square wave from
rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are all ‘0’s)
• CPU executing while(1) statement
• JTAG disabled
3: These parameters are characterized but not tested in manufacturing.