Datasheet

 2009-2012 Microchip Technology Inc. DS70591E-page 413
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
28.0 50 MIPS ELECTRICAL CHARACTERISTICS
This section provides an overview of dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
electrical characteristics for devices operating at 50 MIPS.
Specifications are identical to those shown in Section 27.0 “Electrical Characteristics”, with the exception of the
parameters listed in this section.
Absolute maximum ratings for the dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610 50 MIPS
devices are listed below. Exposure to these maximum rating conditions for extended periods can affect device reliability.
Functional operation of the device at these or any other conditions above the parameters indicated in the operation
listings of this specification is not implied.
Absolute Maximum Ratings
(1)
Ambient temperature under bias...............................................................................................................-40°C to +85°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on V
DD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant, with respect to V
SS
(2)
................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to V
SS, when VDD  3.0V
(2)
................................................. -0.3V to +5.6V
Voltage on any 5V tolerant pin with respect to V
SS, when VDD < 3.0V
(2)
........................................ -0.3V to (VDD + 0.3V)
Maximum current out of VSS pin ...........................................................................................................................300 mA
Maximum current into V
DD pin
(2)
...........................................................................................................................250 mA
Maximum current sourced/sunk by any 4x I/O pin ..................................................................................................15 mA
Maximum current sourced/sunk by any 8x I/O pin ..................................................................................................25 mA
Maximum current sourced/sunk by any 16x I/O pin ................................................................................................45 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports
(2)
...............................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: See the “Pin Diagrams” section for 5V tolerant pins.