Datasheet

 2009-2012 Microchip Technology Inc. DS70591E-page 377
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
TABLE 27-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
TABLE 27-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Program Flash Memory
D130 EP Cell Endurance 10,000 — — E/W -40C to +125C
D131 V
PR VDD for Read VMIN —3.6VVMIN = Minimum operating
voltage
D132B VPEW VDD for Self-Timed Write VMIN —3.6VVMIN = Minimum operating
voltage
D134 T
RETD Characteristic Retention 20 — — Year Provided no other specifications
are violated, -40C to +125C
D135 IDDP Supply Current during
Programming
—10 —mA
D136a TRW Row Write Time 1.43 — 1.58 ms TRW = 11064 FRC cycles,
TA = +85°C, See Note 2
D136b T
RW Row Write Time 1.39 — 1.63 ms TRW = 11064 FRC cycles,
T
A = +125°C, See Note 2
D137a T
PE Page Erase Time 21.8 — 24.1 ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE Page Erase Time 21.1 — 24.8 ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a T
WW Word Write Cycle Time 45.8 — 50.7 µs TWW = 355 FRC cycles,
T
A = +85°C, See Note 2
D138b T
WW Word Write Cycle Time 44.5 — 52.3 µs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min.), TUN<5:0> = b'100000 (for Max.).
This parameter depends on the FRC accuracy (see Table 27-20) and the value of the FRC Oscillator
Tuning register (see Register 9-4). For complete details on calculating the minimum and maximum time,
see Section 5.3 “Programming Operations”.
Operating Conditions: -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristics Min Typ Max Units Comments
—C
EFC External Filter Capacitor
Value
(1)
22 — — µF Capacitor must be low
series resistance
(< 0.5 Ohms)
Note 1: Typical V
CAP voltage = 2.5 volts when VDD  VDDMIN.