Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70591E-page 244  2009-2012 Microchip Technology Inc.
REGISTER 16-14: PHASEx: PWM PRIMARY PHASE SHIFT x REGISTER
(1,2)
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
PHASEx<15:8>
bit 15 bit 8
R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0
PHASEx<7:0>
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-0 PHASEx<15:0>: PWM Phase Shift Value or Independent Time Base Period for the PWM Generator bits
Note 1: If PWMCONx<9> = 0, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<10:8> = 00, 01 or 10),
PHASEx<15:0> = Phase Shift Value for PWMxH and PWMxL outputs.
• True Independent Output mode (IOCONx<10:8> = 11), PHASEx<15:0> = Phase Shift Value for
PWMxH only.
• The PHASEx/SPHASEx registers provide the phase shift with respect to the master time base;
therefore, the valid range is 0x0000 through period.
2: If PWMCONx<9> = 1, the following applies based on the mode of operation:
• Complementary, Redundant and Push-Pull Output mode (IOCONx<10:8> = 00, 01 or 10),
PHASEx<15:0> = Independent Time Base Period Value for PWMxH and PWMxL.
• True Independent Output mode (IOCONx<10:8> = 11). PHASEx<15:0> = Independent Time Base
Period Value for PWMxH only.
• When the PHASEx/SPHASEx registers provide the local period, the valid range is 0x0000 through
0xFFF8.