Datasheet

dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
DS70283K-page 314 © 2007-2012 Microchip Technology Inc.
Revision D (December 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text.
The major changes are referenced by their respective
section in the following table.
TABLE A-2: MAJOR SECTION UPDATES
Section Name Update Description
“High-Performance, 16-bit Digital
Signal Controllers”
Updated all pin diagrams to denote the pin voltage tolerance (see “Pin
Diagrams”).
Section 2.0 “Guidelines for Getting
Started with 16-bit Digital Signal
Controllers”
Added new section to the data sheet that provides guidelines on getting
started with 16-bit Digital Signal Controllers.
Section 10.0 “I/O Ports” Updated 5V tolerant status for I/O pin RB4 from Yes to No (see Table 10-1).
Section 24.0 “Electrical
Characteristics”
Removed the maximum value for parameter DC12 (RAM Data Retention
Voltage) in Table 24-4.
Updated typical values for Operating Current (IDD) and added Note 3 in
Table 24-5.
Updated typical and maximum values for Idle Current (I
IDLE): Core OFF
Clock ON Base Current and added Note 3 in Table 24-6.
Updated typical and maximum values for Power Down Current (I
PD) and
added Note 5 in Table 24-7.
Updated typical and maximum values for Doze Current (ID
OZE) and added
Note 2 in Table 24-8.
Added Note 3 to Table 24-12.
Updated minimum value for Internal Voltage Regulator Specifications in
Table 24-13.
Added parameter OS42 (G
M) and Notes 4, 5 and 6 to Table 24-16.
Added Notes 2 and 3 to Table 24-17.
Added Note 2 to Table 24-20.
Added Note 2 to Table 24-21.
Added Note 2 to Table 24-22.
Added Note 1 to Table 24-23.
Added Note 1 to Table 24-24.
Added Note 3 to Table 24-36.
Added Note 2 to Table 24-37.
Updated typical value for parameter AD08 (ADC in operation) and added
Notes 2 and 3 in Table 24-38.
Updated minimum, typical, and maximum values for parameters AD23a,
AD24a, AD30a, AD32a, AD32a and AD34a, and added Notes 2 and 3 in
Table 24-39.
Updated minimum, typical, and maximum values for parameters AD23b,
AD24b, AD30b, AD32b, AD32b and AD34b, and added Notes 2 and 3 in
Table 24-40.