Datasheet

© 2007-2012 Microchip Technology Inc. DS70283K-page 311
dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
Section 15.0 “Motor Control PWM
Module”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 14.3 “PWM Time Base”
• 14.4 “PWM Period”
• 14.5 “Edge-Aligned PWM”
• 14.6 “Center-Aligned PWM”
• 14.7 “PWM Duty Cycle Comparison Units”
• 14.8 “Complementary PWM Operation”
• 14.9 “Dead-Time Generators”
• 14.10 “Independent PWM Output”
• 14.11 “Single Pulse PWM Operation”
• 14.12 “PWM Output Override”
• 14.13 “PWM Output and Polarity Control”
• 14.14 “PWM Fault Pins”
• 14.15 “PWM Update Lockout”
• 14.16 “PWM Special Event Trigger”
• 14.17 “PWM Operation During CPU Sleep Mode”
• 14.18 “PWM Operation During CPU Idle Mode”
Section 16.0 “Quadrature Encoder
Interface (QEI) Module”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 15.1 “Quadrature Encoder Interface Logic”
• 15.2 “16-bit Up/Down Position Counter Mode”
• 15.3 “Position Measurement Mode”
• 15.4 “Programmable Digital Noise Filters”
• 15.5 “Alternate 16-bit Timer/Counter”
• 15.6 QEI Module Operation During CPU Sleep Mode”
• 15.7 “QEI Module Operation During CPU Idle Mode”
• 15.8 “Quadrature Encoder Interface Interrupts”
Section 17.0 “Serial Peripheral
Interface (SPI)”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 16.1 “Interrupts”
• 16.2 “Receive Operations”
• 16.3 “Transmit Operations”
• 16.4 “SPI Setup” (retained Figure 17-1: SPI Module Block Diagram)
TABLE A-1: MAJOR SECTION UPDATES (CONTINUED)
Section Name Update Description