Datasheet

dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
DS70283K-page 234 © 2007-2012 Microchip Technology Inc.
TABLE 24-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
(3)
Typical
(2)
Max Units Conditions
Operating Current (IDD)
(1)
DC20d 20 30 mA -40°C
3.3V 10 MIPS
(3)
DC20a 19 22 mA +25°C
DC20b 19 25 mA +85°C
DC20c 19 30 mA +125°C
DC21d 28 40 mA -40°C
3.3V 16 MIPS
(3)
DC21a 27 30 mA +25°C
DC21b 27 32 mA +85°C
DC21c 27 36 mA +125°C
DC22d 33 50 mA -40°C
3.3V 20 MIPS
(3)
DC22a 33 40 mA +25°C
DC22b 33 40 mA +85°C
DC22c 33 50 mA +125°C
DC23d 44 60 mA -40°C
3.3V 30 MIPS
(3)
DC23a 43 50 mA +25°C
DC23b 42 55 mA +85°C
DC23c 41 65 mA +125°C
DC24d 55 75 mA -40°C
3.3V 40 MIPS
DC24a 54 65 mA +25°C
DC24b 52 70 mA +85°C
DC24c 51 80 mA +125°C
Note 1: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode with PLL, OSC1 is driven with external square wave from
rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: These parameters are characterized but not tested in manufacturing.
3: Data in “Typ” column is at 3.3V, +25ºC unless otherwise stated.