Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70591E-page 416  2009-2012 Microchip Technology Inc.
TABLE 28-4: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
Parameter No. Typical Max
Doze
Ratio
Units Conditions
Doze Current (I
DOZE)
(1)
MDC74a 49 70 1:2 mA
-40°C 3.3V 50 MIPSMDC74f 43 70 1:64 mA
MDC74g 43 70 1:128 mA
MDC75a 47 70 1:2 mA
+25°C 3.3V 50 MIPSMDC75f 41 70 1:64 mA
MDC75g 41 70 1:128 mA
MDC76a 46 70 1:2 mA
+85°C 3.3V 50 MIPSMDC76f 40 70 1:64 mA
MDC76g 40 70 1:128 mA
Note 1: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits
are ‘0’s)
• CPU executing while(1) statement
• JTAG is disabled