Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70591E-page 378  2009-2012 Microchip Technology Inc.
27.2 AC Characteristics and Timing Parameters
This section defines dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610 AC characteristics and
timing parameters.
TABLE 27-14: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 27-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 27-15: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Operating voltage V
DD range as described in Section 27.0 “Electrical
Characteristics”.
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
DO50 C
OSCO OSC2 Pin — — 15 pF In XT and HS modes, when
external clock is used to drive
OSC1
DO56 C
IO All I/O Pins and OSC2 — — 50 pF EC mode
DO58 CB SCLx, SDAx — — 400 pF In I
2
C™ mode
VDD/2
C
L
RL
Pin
Pin
V
SS
VSS
CL
RL =464
C
L = 50 pF for all pins except OSC2
15 pF for OSC2 output
Load Condition 1
– for all pins except OSC2 Load Condition 2 – for OSC2