Datasheet

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
DS70591E-page 370  2009-2012 Microchip Technology Inc.
TABLE 27-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (IIDLE): Core Off, Clock On Base Current
(2)
DC40d 8 15 mA -40°C
3.3V 10 MIPS
DC40a 9 15 mA +25°C
DC40b 9 15 mA +85°C
DC40c 10 15 mA +125°C
DC41d 11 20 mA -40°C
3.3V 16 MIPS
(3)
DC41a 11 mA +25°C20
DC41b 11 20 mA +85°C
DC41c 12 20 mA +125°C
DC42d 14 25 mA -40°C
3.3V 20 MIPS
(3)
DC42a 14 25 mA +25°C
DC42b 14 25 mA +85°C
DC42c 15 25 mA +125°C
DC43d 20 30 mA -40°C
3.3V 30 MIPS
(3)
DC43a 20 30 mA +25°C
DC43b 21 30 mA +85°C
DC43c 22 30 mA +125°C
DC44d 29 40 mA -40°C
3.3V 40 MIPS
DC44a 29 40 mA +25°C
DC44b 30 40 mA +85°C
DC44c 31 40 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: Base Idle current (I
IDLE) is measured as follows:
• CPU core is off, oscillator is configured in EC mode and external clock is active, OSC1 is driven with
external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are
all ‘0’s)
• JTAG is disabled
3: These parameters are characterized but not tested in manufacturing.