Datasheet

 2009-2012 Microchip Technology Inc. DS70591E-page 317
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
REGISTER 22-2: ADSTAT: ADC STATUS REGISTER
U-0 U-0 U-0 R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS
— — — P12RDY
(1)
P11RDY
(1)
P10RDY
(1)
P9RDY
(1)
P8RDY
(1)
bit 15 bit 8
R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS R/C-0, HS
P7RDY
(1)
P6RDY
(1)
P5RDY
(1)
P4RDY
(1)
P3RDY
(1)
P2RDY
(1)
P1RDY
(1)
P0RDY
(1)
bit 7 bit 0
Legend: C = Clearable bit HS - Hardware Settable bit
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-13 Unimplemented: Read as ‘0’
bit 6 P12RDY: Conversion Data for Pair 12 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 5 P11RDY: Conversion Data for Pair 11 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 4 P10RDY: Conversion Data for Pair 10 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 3 P9RDY: Conversion Data for Pair 9 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 2 P8RDY: Conversion Data for Pair 8 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 1 P7RDY: Conversion Data for Pair 7 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 6 P6RDY: Conversion Data for Pair 6 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 5 P5RDY: Conversion Data for Pair 5 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 4 P4RDY: Conversion Data for Pair 4 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 3 P3RDY: Conversion Data for Pair 3 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 2 P2RDY: Conversion Data for Pair 2 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 1 P1RDY: Conversion Data for Pair 1 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
bit 0 P0RDY: Conversion Data for Pair 0 Ready bit
(1)
Bit is set when data is ready in buffer, cleared when a ‘0’ is written to this bit.
Note 1: Not all PxRDY bits are available on all devices. See Figure 22-1, Figure 22-2, Figure 22-3 and Figure 22-4
for the available analog inputs.