Datasheet

© 2007-2011 Microchip Technology Inc. DS70290J-page 215
dsPIC33FJ32GP202/204 and dsPIC33FJ16GP304
TABLE 22-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter No. Typical
(2)
Max
Doze
Ratio
Units Conditions
Doze Current (I
DOZE)
(1)
DC73a 41 51 1:2 mA
-40°C 3.3V 40 MIPSDC73f 20 28 1:64 mA
DC73g 19 24 1:128 mA
DC70a 40 46 1:2 mA
+25°C 3.3V 40 MIPSDC70f 18 20 1:64 mA
DC70g 18 20 1:128 mA
DC71a 40 46 1:2 mA
+85°C 3.3V 40 MIPSDC71f 18 25 1:64 mA
DC71g 18 20 1:128 mA
DC72a 39 55 1:2 mA
+125°C 3.3V 40 MIPSDC72f 18 30 1:64 mA
DC72g 18 25 1:128 mA
Note 1: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square
wave from rail-to-rail with overshoot/undershoot < 250 mV
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (defined PMDx bits
are set to zero and unimplemented PMDx bits are set to one)
• CPU executing while(1) statement
• JTAG is disabled
2: Data in the “Typ” column is at 3.3V, +25ºC unless otherwise stated.