Datasheet

dsPIC33FJXXXGPX06/X08/X10
DS70286C-page 266 © 2009 Microchip Technology Inc.
25.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
dsPIC33FJXXXGPX06/X08/X10 AC characteristics
and timing parameters.
TABLE 25-14: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 25-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 25-15: CAPACITIVE LOADING REQUIREMENTS ON OUTPUT PINS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
Operating voltage V
DD range as described in Section 25.0 “Electrical
Characteristics”.
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
DO50 C
OSC2 OSC2/SOSC2 pin — — 15 pF In XT and HS modes when
external clock is used to drive
OSC1
DO56 C
IO All I/O pins and OSC2 — — 50 pF EC mode
DO58 C
B SCLx, SDAx — — 400 pF In I
2
C™ mode
VDD/2
CL
RL
Pin
Pin
V
SS
VSS
CL
RL =464Ω
C
L = 50 pF for all pins except OSC2
15 pF for OSC2 output
Load Condition 1
- for all pins except OSC2 Load Condition 2 - for OSC2