Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 281
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
TABLE 26-4: DC TEMPERATURE AND VOLTAGE SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
Operating Voltage
DC10 Supply Voltage
(3)
VDD —VBOR — 3.6 V Industrial and Extended
DC12 V
DR RAM Data Retention Voltage
(2)
1.8 — — V
DC16 V
POR VDD Start Voltage
to Ensure Internal
Power-on Reset Signal
—1.75VSS V
DC17 SVDD VDD Rise Rate
to Ensure Internal
Power-on Reset Signal
0.024 — — V/ms 0-2.4V in 0.1s
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: This is the limit to which V
DD may be lowered without losing RAM data.
3: Overall functional device operation at V
BOR < VDD < VDDMIN is ensured but not characterized. All device
analog modules, such as the ADC, etc., will function but with degraded performance below VDDMIN.
TABLE 26-5: ELECTRICAL CHARACTERISTICS: BROWN-OUT RESET (BOR)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min
(1)
Typ Max Units Conditions
BO10 VBOR BOR Event on VDD Transition
High-to-Low
2.40 2.48 2.55 V See Note 2
Note 1: Parameters are for design guidance only and are not tested in manufacturing.
2: Overall functional device operation at V
BOR < VDD < VDDMIN is ensured but not characterized. All device
analog modules, such as the ADC, etc., will function but with degraded performance below V
DDMIN.