Datasheet
2011-2012 Microchip Technology Inc. DS70652E-page 229
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
20.0 COMPARATOR MODULE
The comparator module provides three comparators
that can be configured in different ways. As shown in
Figure 20-1, individual comparator options are
specified by the comparator module’s Special Function
Register (SFR) control bits.
These options allow users to:
• Select the edge for trigger and interrupt generation
• Select low-power control
• Configure the comparator voltage reference and
band gap
• Configure output blanking and masking
The comparator operating mode is determined by the
input selections (i.e., whether the input voltage is
compared to a second input voltage) to an internal
voltage reference.
FIGURE 20-1: COMPARATOR I/O OPERATING MODES
Note 1: This data sheet summarizes the features
of the dsPIC33FJ16(GP/MC)101/102
and dsPIC33FJ32(GP/MC)101/102/104
device families. It is not intended to be a
comprehensive reference source. To com-
plement the information in this data sheet,
refer to Section 54. “Comparator with
Blanking” (DS70647) of the “dsPIC33F/
PIC24H Family Reference Manual”, which
is available from the Microchip web site
(www.microchip.com).
2: Some registers and associated bits
described in this section may not be
available on all devices. Refer to
Section 4.0 “Memory Organization” in
this data sheet for device-specific register
and bit information.
C3
C1
Blanking
Function
Digital
Filter
C2
CVREF
(Figure 20-3)
(Figure 20-4)
–
+
V
IN-
V
IN+
–
+
V
IN-
V
IN+
–
+
V
IN-
V
IN+
BGSEL<1:0>
AVDD AVSS
IVREF
(1)
C1INB
C1INC
C1IND
MUX
C1INA
INTREF
MUX
C2INB
C2INC
C2IND
C2INA
INTREF
CV
REFIN
MUX
C3INB
C3INC
C3IND
MUX
C3INA
INTREF
CV
REFIN
CVREFIN
C1OUT
CPOL
Interrupt
Logic
EVPOL<1:0>
COE
COUT
Blanking
Function
Digital
Filter
(Figure 20-3)
(Figure 20-4)
C2OUT
CPOL
Interrupt
Logic
EVPOL<1:0>
COE
COUT
Digital
Filter
(Figure 20-4)
C3OUT
CPOL
Interrupt
Logic
EVPOL<1:0>
COE
COUT
Note 1: This reference voltage is generated internally on the device. Refer to Section 26.0 “Electrical
Characteristics” for the specified voltage range.
MUX
MUX
Function
(Figure 20-3)
Blanking
Reference
(Figure 20-2)
Comparator Voltage