Manualshelf

Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller SOIC 28 16-Bit 16 null I/O number 21
221222223224225226227228229230
2011-2012 Microchip Technology Inc. DS70652E-page 221
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
bit 1 SAMP: ADC Sample Enable bit
1 = ADC Sample-and-Hold amplifiers are sampling
0 = ADC Sample-and-Hold amplifiers are holding
If ASAM = 0, software can write ‘1’ to begin sampling; automatically set by hardware if ASAM = 1.
If SSRC<2:0> = 000, software can write ‘0’ to end sampling and start conversion. If SSRC<2:0> 000,
automatically cleared by hardware to end sampling and start conversion.
bit 0 DONE: ADC Conversion Status bit
1 = ADC conversion cycle is completed
0 = ADC conversion has not started or is in progress
Automatically set by hardware when ADC conversion is complete. Software can write ‘0’ to clear the
DONE bit status (software not allowed to write ‘1’). Clearing this bit will NOT affect any operation in
progress. Automatically cleared by hardware at start of a new conversion.
REGISTER 19-1: AD1CON1: ADC1 CONTROL REGISTER 1 (CONTINUED)
Note 1: This feature is available in dsPIC33FJ(16/32)MC10X devices only.