Datasheet

dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
DS70652E-page 330  2011-2012 Microchip Technology Inc.
TABLE 26-47: ADC MODULE SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(6)
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min. Typ Max. Units Conditions
Device Supply
AD01 AV
DD Module VDD Supply
(2,4)
Greater of
VDD – 0.3
or 2.9
— Lesser of
VDD + 0.3
or 3.6
V
AD02 AVSS Module VSS Supply
(2,5)
VSS – 0.3 — VSS + 0.3 V
AD09 I
AD Operating Current — 7.0 9.0 mA See Note 1
Analog Input
AD12 V
INH Input Voltage Range
V
INH
(2)
VINL —AVDD V This voltage reflects S&H
Channels 0, 1, 2 and 3
(CH0-CH3), positive input
AD13 V
INL Input Voltage Range
VINL
(2)
AVSS —AVSS + 1V V This voltage reflects S&H
Channels 0, 1, 2 and 3
(CH0-CH3), negative input
AD17 RIN Recommended
Impedance of Analog
Voltage Source
(3)
——200
Note 1: These parameters are not characterized or tested in manufacturing.
2: These parameters are characterized, but are not tested in manufacturing.
3: These parameters are assured by design, but are not characterized or tested in manufacturing.
4: This pin may not be available on all devices; in which case, this pin will be connected to V
DD internally.
See the “Pin Diagrams” section for availability.
5: This pin may not be available on all devices; in which case, this pin will be connected to V
SS internally. See
the “Pin Diagrams” section for availability.
6: Overall functional device operation at V
BOR < VDD < VDDMIN is ensured but not characterized. All device
analog modules, such as the ADC, etc., will function but with degraded performance below VDDMIN.