Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 291
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
TABLE 26-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
TABLE 26-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param
No.
Symbol Characteristic
(3)
Min Typ
(1)
Max Units Conditions
Program Flash Memory
D130a EP Cell Endurance 10,000 — — E/W -40C to +125C
D131 V
PR VDD for Read VMIN —3.6 VVMIN = Minimum operating
voltage
D132B VPEW VDD for Self-Timed Write VMIN —3.6 VVMIN = Minimum operating
voltage
D134 TRETD Characteristic Retention 20 — — Year Provided no other specifications
are violated
D135 I
DDP Supply Current during
Programming
—10—mA
D137a TPE Page Erase Time 20.1 — 26.5 ms TPE = 168517 FRC cycles,
TA = +85°C, See Note 2
D137b TPE Page Erase Time 19.5 — 27.3 ms TPE = 168517 FRC cycles,
TA = +125°C, See Note 2
D138a T
WW Word Write Cycle Time 47.4 — 49.3 µs TWW = 355 FRC cycles,
T
A = +85°C, See Note 2
D138b T
WW Word Write Cycle Time 47.4 — 49.3 µs TWW = 355 FRC cycles,
TA = +125°C, See Note 2
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = b'011111 (for Min), TUN<5:0> = b'100000 (for Max).
This parameter depends on the FRC accuracy (see Table 26-18) and the value of the FRC Oscillator
Tuning register (see Register 8-3). For complete details on calculating the Minimum and Maximum time,
see Section 5.3 “Programming Operations”.
3: These parameters are ensured by design, but are not characterized or tested in manufacturing.
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristics Min Typ Max Units Comments
—C
EFC External Filter Capacitor
Value
(1)
4.7 10 — µF Capacitor must be low
series resistance
(< 5 ohms)
Note 1: Typical VCAP voltage = 2.5V when VDD  VDDMIN.