Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 287
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
TABLE 26-9: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter No. Typical
(1)
Max
Doze
Ratio
(2)
Units Conditions
Doze Current (I
DOZE)
(2)
– dsPIC33FJ16(GP/MC)10X Devices
DC73a 13.2 17.2 1:2 mA
-40°C 3.3V 16 MIPSDC73f 4.7 6.2 1:64 mA
DC73g 4.7 6.2 1:128 mA
DC70a 13.2 17.2 1:2 mA
+25°C
3.3V 16 MIPSDC70f 4.7 6.2 1:64 mA
DC70g 4.7 6.2 1:128 mA
DC71a 13.2 17.2 1:2 mA
+85°C
3.3V 16 MIPSDC71f 4.7 6.2 1:64 mA
DC71g 4.7 6.2 1:128 mA
DC72a 13.2 17.2 1:2 mA
+125°C
3.3V 16 MIPSDC72f 4.7 6.2 1:64 mA
DC72g 4.7 6.2 1:128 mA
Doze Current (I
DOZE)
(2)
– dsPIC33FJ32(GP/MC)10X Devices
DC73a 13.2 17.2 1:2 mA
-40°C 3.3V 16 MIPSDC73f 4.7 6.2 1:64 mA
DC73g 4.7 6.2 1:128 mA
DC70a 13.2 17.2 1:2 mA
+25°C
3.3V 16 MIPSDC70f 4.7 6.2 1:64 mA
DC70g 4.7 6.2 1:128 mA
DC71a 13.2 17.2 1:2 mA
+85°C
3.3V 16 MIPSDC71f 4.7 6.2 1:64 mA
DC71g 4.7 6.2 1:128 mA
DC72a 13.2 17.2 1:2 mA
+125°C
3.3V 16 MIPSDC72f 4.7 6.2 1:64 mA
DC72g 4.7 6.2 1:128 mA
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
2: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DOZE measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroes)
• CPU executing while(1) statement