Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 285
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
Idle Current (IIDLE): Core OFF, Clock ON Base Current
(2)
– dsPIC33FJ32(GP/MC)10X Devices
DC40d 0.4 1.0 mA -40°C
3.3V
LPRC
(32.768 kHz)
(3)
DC40a 0.4 1.0 mA +25°C
DC40b 0.4 1.0 mA +85°C
DC40c 0.5 1.0 mA +125°C
DC41d 0.5 1.1 mA -40°C
3.3V 1 MIPS
(3)
DC41a 0.5 1.1 mA +25°C
DC41b 0.5 1.1 mA +85°C
DC41c 0.8 1.1 mA +125°C
DC42d 0.9 1.6 mA -40°C
3.3V 4 MIPS
(3)
DC42a 0.9 1.6 mA +25°C
DC42b 1.0 1.6 mA +85°C
DC42c 1.2 1.6 mA +125°C
DC43a 1.6 2.6 mA +25°C
3.3V 10 MIPS
(3)
1.6 2.6DC43d mA -40°C
DC43b 1.7 2.6 mA +85°C
DC43c 2.0 2.6 mA +125°C
DC44d 2.4 3.8 mA -40°C
3.3V 16 MIPS
(3)
DC44a 2.4 3.8 mA +25°C
DC44b 2.6 3.8 mA +85°C
DC44c 2.9 3.8 mA +125°C
TABLE 26-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: Base Idle current is measured as follows:
• CPU core is off, oscillator is configured in EC mode, OSC1 is driven with external square wave from
rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• External Secondary Oscillator (SOSC) is disabled (i.e., SOSCO and SOSCI pins are configured as
digital I/O inputs)
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
3: These parameters are characterized, but not tested in manufacturing.