Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 279
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
26.0 ELECTRICAL CHARACTERISTICS
This section provides an overview of the dsPIC33FJ16(GP/MC)101/102 and dsPIC33FJ32(GP/MC)101/102/104 electrical
characteristics. Additional information will be provided in future revisions of this document as it becomes available.
Absolute maximum ratings for the dsPIC33FJ16(GP/MC)101/102 and dsPIC33FJ32(GP/MC)101/102/104 family are
listed below. Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional
operation of the device at these, or any other conditions above the parameters indicated in the operation listings of this
specification, is not implied.
Absolute Maximum Ratings
(1)
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +150°C
Voltage on V
DD with respect to VSS ......................................................................................................... -0.3V to +4.0V
Voltage on any pin that is not 5V tolerant with respect to V
SS
(3)
.................................................... -0.3V to (VDD + 0.3V)
Voltage on any 5V tolerant pin with respect to VSS when VDD  3.0V
(3)
.................................................. -0.3V to +5.6V
Voltage on any 5V tolerant pin with respect to V
SS when VDD  3.0V
(3)
....................................... -0.3V to (VDD + 0.3V)
Maximum current out of V
SS pin ...........................................................................................................................300 mA
Maximum current into VDD pin
(2)
...........................................................................................................................250 mA
Maximum output current sourced and sunk by any I/O pin excluding OSCO .........................................................15 mA
Maximum output current sourced and sunk by OSCO............................................................................................25 mA
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports
(2)
...............................................................................................................200 mA
Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods may affect device reliability.
2: Maximum allowable current is a function of the device maximum power dissipation (see Table 26-2).
3: See the “Pin Diagrams” section for 5V tolerant pins.