Datasheet

dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
DS70652E-page 146  2011-2012 Microchip Technology Inc.
10.7 Peripheral Pin Select Registers
The dsPIC33FJ16(GP/MC)101/102 and
dsPIC33FJ32(GP/MC)101/102/104 family of devices
implements up to 23 registers for remappable
peripheral configuration.
Note: Input and Output Register values can only
be changed if IOLOCK (OSCCON<6>) = 0.
See Section 10.4.3.1 “Control Register
Lock” for a specific command sequence.
REGISTER 10-1: RPINR0: PERIPHERAL PIN SELECT INPUT REGISTER 0
U-0 U-0 U-0 R/W-1 R/W-1 R/W-1 R/W-1 R/W-1
— — —INT1R<4:0>
bit 15 bit 8
U-0 U-0 U-0 U-0 U-0 U-0 U-0 U-0
— — — — — — — —
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-13 Unimplemented: Read as ‘0’
bit 12-8 INT1R<4:0>: Assign External Interrupt 1 (INTR1) to the Corresponding RPn Pin bits
11111 = Input tied to V
SS
11110 = Reserved
.
.
.
11010 = Reserved
11001 = Input tied to RP25
.
.
.
00001 = Input tied to RP1
00000 = Input tied to RP0
bit 7-0 Unimplemented: Read as ‘0’