Datasheet

 2011-2012 Microchip Technology Inc. DS70652E-page 283
dsPIC33FJ16(GP/MC)101/102 AND dsPIC33FJ32(GP/MC)101/102/104
Operating Current (IDD)
(2)
– dsPIC33FJ32(GP/MC)10X Devices
DC20d 1 2 mA -40°C
3.3V
LPRC
(32.768 kHz)
(3)
DC20a 1 2 mA +25°C
DC20b 1.1 2 mA +85°C
DC20c 1.3 2 mA +125°C
DC21d 1.7 3 mA -40°C
3.3V 1 MIPS
(3)
DC21a 2.3 mA +25°C3
DC21b 2.3 3 mA +85°C
DC21c 2.4 3 mA +125°C
DC22d 7 8.5 mA -40°C
3.3V 4 MIPS
(3)
DC22a 7 8.5 mA +25°C
DC22b 7 mA +85°C8.5
8.5DC22c 7 mA +125°C
DC23d 13.2 17 mA -40°C
3.3V 10 MIPS
(3)
DC23a 13.2 17 mA +25°C
DC23b 13.2 17 mA +85°C
DC23c 13.2 17 mA +125°C
DC24d 17 22 mA -40°C
3.3V 16 MIPS
DC24a 17 mA +25°C22
DC24b 17 22 mA +85°C
DC24c 17 22 mA +125°C
TABLE 26-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are all
zeroed)
• CPU executing while(1) statement
3: These parameters are characterized, but not tested in manufacturing.