Datasheet

dsPIC33FJ12MC201/202
DS70265E-page 226 © 2007-2011 Microchip Technology Inc.
TABLE 24-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤T
A ≤+125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (IDD)
(2)
DC20d 24 30 mA -40°C
3.3V 10 MIPS
(3)
DC20a 27 30 mA +25°C
DC20b 27 30 mA +85°C
DC20c 27 35 mA +125°C
DC21d 30 40 mA -40°C
3.3V 16 MIPS
(3)
DC21a 31 40 mA +25°C
DC21b 32 45 mA +85°C
DC21c 33 45 mA +125°C
DC22d 35 50 mA -40°C
3.3V 20 MIPS
(3)
DC22a 38 50 mA +25°C
DC22b 38 55 mA +85°C
DC22c 39 55 mA +125°C
DC23d 47 70 mA -40°C
3.3V 30 MIPS
(3)
DC23a 48 70 mA +25°C
DC23b 48 70 mA +85°C
DC23c 48 70 mA +125°C
DC24d 56 90 mA -40°C
3.3V 40 MIPS
DC24a 56 90 mA +25°C
DC24b 54 90 mA +85°C
DC24c 54 90 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, 25°C unless otherwise stated.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
SS.
MCLR = VDD, WDT and FSCM are disabled. CPU, SRAM, program memory and data memory are opera-
tional. No peripheral modules are operating; however, every peripheral is being clocked (PMD bits are all
zeroed).
3: These parameters are characterized, but not tested in manufacturing.