Information

 2010-2012 Microchip Technology Inc. DS80461G-page 11
dsPIC33FJ12MC201/202
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS70265E):
1. Module: Electrical Characteristics
The maximum value for parameter DI19 (VIL specifica-
tions for SDAx and SCLx pins) was stated incorrectly in
Table 24-9 of the current device data sheet. Also,
parameters DI28 and DI29 (V
IH specifications for SDAx
and SCLx pins) were not stated. The correct values are
shown in bold type in Table 24-9.
TABLE 24-9: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
2. Module: Electrical Characteristics
The temperature range for parameter F20a
(Internal FRC accuracy) was stated incorrectly in
Table 24-18 of the current device data sheet. The
correct values are shown in bold type in
Table 24-18.
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
V
IL Input Low Voltage
DI18 SDAx, SCLx V
SS — 0.3 VDD V SMBus disabled
DI19 SDAx, SCLx VSS — 0.8 V SMBus enabled
V
IH Input High Voltage
DI28 SDAx, SCLx 0.7 VDD — 5.5 V SMBus disabled
DI29 SDAx, SCLx 2.1 — 5.5 V SMBus enabled
TABLE 24-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min Typ Max Units Conditions
Internal FRC Accuracy @ 7.3728 MHz
(1)
F20a FRC -2 — +2 % 0°C  TA  +85°C VDD = 3.0-3.6V
F20b FRC -5 — +5 % -40°C  T
A  +125°C VDD = 3.0-3.6V
Note 1: Frequency calibrated at 25°C and 3.3V. TUN bits may be used to compensate for temperature drift.