Datasheet

dsPIC33FJ12MC201/202
DS70265E-page 228 © 2007-2011 Microchip Technology Inc.
TABLE 24-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤T
A ≤+125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (IPD)
(2)
DC60d 55 500 μA-40°C
3.3V Base Power-Down Current
(3,4)
DC60a 63 500 μA+25°C
DC60b 85 500 μA+85°C
DC60c 146 1000 μA +125°C
DC61d 8 13 μA-40°C
3.3V Watchdog Timer Current: ΔI
WDT
(3,5)
DC61a 10 15 μA+25°C
DC61b 12 20 μA+85°C
DC61c 13 25 μA +125°C
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled to VSS. WDT, etc., are all switched off, and VREGS (RCON<8>) = 1.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
4: These currents are measured on the device containing the most memory in this family.
5: These parameters are characterized, but not tested in manufacturing.
TABLE 24-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤TA ≤+125°C for Extended
Parameter No. Typical
(1)
Max
Doze
Ratio
(2)
Units Conditions
DC73a 11 35 1:2 mA
-40°C 3.3V 40 MIPSDC73f 11 30 1:64 mA
DC73g 11 30 1:128 mA
DC70a 11 50 1:2 mA
+25°C 3.3V 40 MIPSDC70f 11 30 1:64 mA
DC70g 11 30 1:128 mA
DC71a 12 50 1:2 mA
+85°C 3.3V 40 MIPSDC71f 12 30 1:64 mA
DC71g 12 30 1:128 mA
DC72a 12 50 1:2 mA
+125°C 3.3V 40 MIPSDC72f 12 30 1:64 mA
DC72g 12 30 1:128 mA
Note 1: Data in the Typical column is at 3.3V, 25°C unless otherwise stated.
2: Parameters with DOZE ratios of 1:2 and 1:64 are characterized, but are not
tested in manufacturing.