Datasheet

dsPIC33FJ12GP201/202
DS70264E-page 246 © 2007-2011 Microchip Technology Inc.
Revision C (June 2008)
This revision includes minor typographical and
formatting changes throughout the data sheet text.
The major changes are referenced by their respective
section in the following table.
TABLE 23-1: MAJOR SECTION UPDATES
Section Name Update Description
“High-Performance, 16-Bit Digital
Signal Controllers”
Added SSOP to list of available 28-pin packages (see “Packaging:” and
Tabl e 1 ) .
Added External Interrupts column to Remappable Peripherals in the
Controller Families table and Note 2 (see Table 1).
Added Note 1 to all pin diagrams, which references RPn pin usage by
remappable peripherals (see “Pin Diagrams”).
Section 1.0 “Device Overview” Changed Capture Input pin names from IC0-IC1 to IC1-IC2 and updated
description for AV
DD (see Table 1-1).
Section 4.0 “Memory Organization” Added SFR definitions (ACCAL, ACCAH, ACCAU, ACCBL, ACCBH, and
ACCBU) to the CPU Core Register Map (see Table 4-1).
Updated Reset value for CORCON SFR (see Table 4-1).
Updated Reset values for the following SFRs: IPC1, IPC2-ICP7, IPC16, and
INTTREG (see Table 4-4).
The following changes were made to the ADC1 Register Maps:
• Updated the bit range for AD1CON3 from ADCS<5:0> to ADCS<7:0>)
(see Table 4-14 and Table 4-15).
• Updated Reset value for PLLFBD SFR (see Table 4-19).
• Added Bit 6 (PCFG7) and Bit 7 (PCFG6) names to AD1PCFGL
(Table 4-14).
• Added Bit 6 (CSS7) and Bit 7 (CSS6) names to AD1CSSL (see Table 4-
14).
• Changed Bit 5 and Bit 4 in AD1CSSL to unimplemented (see Table 4-14).
Updated the Reset value for CLKDIV in the System Control Register Map
(see Table 4-19).
Section 5.0 “Flash Program
Memory”
Updated Section 5.3 “Programming Operations” with programming time
formula.
Section 6.0 “Resets” Entire section was replaced to maintain consistency with other dsPIC33F
data sheets.
Section 8.0 “Oscillator
Configuration”
Removed the first sentence of the third clock source item (External Clock) in
Section 8.1.1.2 “Primary”
Updated the default bit values for DOZE and FRCDIV in the Clock Divisor
Register (see Register 8-2).
Added the center frequency in the OSCTUN register for the FRC Tuning bits
(TUN<5:0>) value 011111 and updated the center frequency for bits value
011110 (see Register 8-4)
Section 9.0 “Power-Saving
Features”
Added the following two registers:
• PMD1: Peripheral Module Disable Control Register 1
• PMD2: Peripheral Module Disable Control Register 2