Datasheet

© 2007-2011 Microchip Technology Inc. DS70264E-page 245
dsPIC33FJ12GP201/202
APPENDIX A: REVISION HISTORY
Revision A (January 2007)
Initial release of this document.
Revision B (May 2007)
This revision includes the following corrections and
updates:
• Minor typographical and formatting corrections
throughout the data sheet text.
• New content:
- Addition of bullet item (16-word conversion
result buffer) (see Section 18.1 “Key
Features”)
• Figure update:
- Oscillator System Diagram (see Figure 8-1)
- WDT Block Diagram (see Figure 19-2)
• Equation update:
- Serial Clock Rate (see Equation 15-1)
• Register updates:
- Clock Divisor Register (see Register 8-2)
- PLL Feedback Divisor Register (see
Register 8-3)
- Peripheral Pin Select Input Registers (see
Register 10-1 through Register 10-9)
- ADC1 Input Channel 1, 2, 3 Select Register
(see Register 18-4)
- ADC1 Input Channel 0 Select Register (see
Register 18-5)
• Table updates:
- CNEN2 (see Table 4-2 and Table 4-3)
- Reset Flag Bit Operation (see Table 5-1)
- Configuration Bit Values for Clock Operation
(see Table 8-1)
• Operation value update:
- IOLOCK set/clear operation (see
Section 10.4.3.1 “Control Register Lock”)
• The following tables in Section 22.0 “Electrical
Characteristics” have been updated with
preliminary values:
- Updated Max MIPS for -40°C to +125°C
Temp Range (see Table 22-1)
- Added new parameters for +125°C, and
updated Typical and Max values for most
parameters (see Table 22-5)
- Added new parameters for +125°C, and
updated Typical and Max values for most
parameters (see Table 22-6)
- Added new parameters for +125°C, and
updated Typical and Max values for most
parameters (see Table 22-7)
- Added new parameters for +125°C, and
updated Typical and Max values for most
parameters (see Table 22-8)
- Updated parameter DI51, added parameter
DI51a (see Table 22-9)
- Added Note 1 (see Table 22-11)
- Updated parameter OS30 (see Table 22-16)
- Updated parameter OS52 (see Table 22-17)
- Updated parameter F20, added Note 2 (see
Table 22-18)
- Updated parameter F21 (see Table 22-19)
- Updated parameter TA15 (see Table 22-22)
- Updated parameter TB15 (see Table 22-23)
- Updated parameter TC15 (see Table 22-24)
- Updated parameter IC15 (see Table 22-25)
- Updated parameters AD05, AD06, AD07,
AD08, AD10, and AD11; added parameters
AD05a and AD06a; added Note 2; modified
ADC Accuracy headings to include
measurement information (see Table 22-34)
- Separated the ADC Module Specifications
table into three tables (see Table 22-34,
Table 22-35, and Table 22-36)
- Updated parameter AD50 (see Table 22-37)
- Updated parameters AD50 and AD57 (see
Table 22-38)