Datasheet

dsPIC33FJ12GP201/202
DS70264E-page 212 © 2007-2011 Microchip Technology Inc.
FIGURE 22-6: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS
FIGURE 22-7: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
ICx
IC10 IC11
IC15
Note: Refer to Figure 22-1 for load conditions.
TABLE 22-25: INPUT CAPTURE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Max Units Conditions
IC10 TccL ICx Input Low Time No Prescaler 0.5 TCY + 20 — ns
With Prescaler 10 — ns
IC11 TccH ICx Input High Time No Prescaler 0.5 T
CY + 20 — ns
With Prescaler 10 — ns
IC15 TccP ICx Input Period (T
CY + 40)/N — ns N = prescale
value (1, 4, 16)
Note 1: These parameters are characterized by similarity, but are not tested in manufacturing.
OCx
OC11
OC10
(Output Compare
Note: Refer to Figure 22-1 for load conditions.
or PWM Mode)
TABLE 22-26: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
OC10 TccF OCx Output Fall Time — — — ns See parameter D032
OC11 TccR OCx Output Rise Time — — — ns See parameter D031
Note 1: These parameters are characterized by similarity, but are not tested in manufacturing.