Datasheet

© 2007-2012 Microchip Technology Inc. DS70291G-page 301
dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
REGISTER 23-2: DAC1STAT: DAC STATUS REGISTER
R/W-0 U-0 R/W-0 U-0 U-0 R/W-0 R-0 R-0
LOEN
—LMVOEN— — LITYPE LFULL LEMPTY
bit 15 bit 8
R/W-0 U-0 R/W-0 U-0 U-0 R/W-0 R-0 R-0
ROEN
—RMVOEN— — RITYPE RFULL REMPTY
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15 LOEN: Left Channel DAC Output Enable bit
1 = Positive and negative DAC outputs are enabled
0 = DAC outputs are disabled
bit 14 Unimplemented: Read as ‘0’
bit 13 LMVOEN: Left Channel Midpoint DAC Output Voltage Enable bit
1 = Midpoint DAC output is enabled
0 = Midpoint output is disabled
bit 12-11 Unimplemented: Read as ‘0’
bit 10 LITYPE: Left Channel Type of Interrupt bit
1 = Interrupt if FIFO is EMPTY
0 = Interrupt if FIFO is NOT FULL
bit 9 LFULL: Status, Left Channel Data Input FIFO is FULL bit
1 = FIFO is Full
0 = FIFO is not Full
bit 8 LEMPTY: Status, Left Channel Data Input FIFO is EMPTY bit
1 = FIFO is Empty
0 = FIFO is not Empty
bit 7 ROEN: Right Channel DAC Output Enable bit
1 = Positive and negative DAC outputs are enabled
0 = DAC outputs are disabled
bit 6 Unimplemented: Read as ‘0’
bit 5 RMVOEN: Right Channel Midpoint DAC Output Voltage Enable bit
1 = Midpoint DAC output is enabled
0 = Midpoint output is disabled
bit 4-3 Unimplemented: Read as ‘0’
bit 2 RITYPE: Right Channel Type of Interrupt bit
1 = Interrupt if FIFO is EMPTY
0 = Interrupt if FIFO is NOT FULL
bit 1 RFULL: Status, Right Channel Data Input FIFO is FULL bit
1 = FIFO is Full
0 = FIFO is not Full
bit 0 REMPTY: Status, Right Channel Data Input FIFO is EMPTY bit
1 = FIFO is Empty
0 = FIFO is not Empty