Information

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 and dsPIC33FJ128MCX02/X04
DS80442J-page 12  2009-2013 Microchip Technology Inc.
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS70291G):
1. Module: Electrical Characteristics
For Parameter DC60d (Base IPD) in Table 31-7, the
maximum value is corrected to read as 85 A.
2. Module: Electrical Characteristics
For Parameter DI51d (Input Leakage Current) in
Table 31-9, the maximum value is corrected to
read as ±12 µA.
3. Module: Electrical Characteristics
For Parameter F21 (Internal RC Accuracy) in
Table 31-19, the minimum and maximum values for
the temperature range of -40°C to +85°C are
corrected to read as -30% for minimum and +30%
for maximum.
4. Module: Electrical Characteristics
For Parameter DA01 (Positive Output Differential
Voltage) in Table 31-48, the minimum value is
corrected to read as 0.8V.
5. Module: Electrical Characteristics
Table 31-18: AC Characteristics: Internal RC
Accuracy should be replaced with the following
table.
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
TABLE 31-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min Typ Max Units Conditions
Internal FRC Accuracy @ 7.3728 MHz
(1,2)
F20 FRC -3 — 3 % -40°C  TA  -10°C VDD = 3.0-3.6V
FRC -2 — 2 % -10°C  TA  +85°C VDD = 3.0-3.6V
FRC -5 — 5 % +85°C  TA  +125°C VDD = 3.0-3.6V
Note 1: Frequency calibrated at +25°C and 3.3V. TUNx bits can be used to compensate for temperature drift.
2: Negative current is defined as current sourced by the pin.