Information

 2009-2013 Microchip Technology Inc. DS80000443K-page 11
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04 and dsPIC33FJ128GPX02/X04
Data Sheet Clarifications
The following typographic corrections and clarifications
are to be noted for the latest version of the device data
sheet (DS70292G):
1. Module: Electrical Characteristics
For Parameter DC60d (Base IPD) in Table 30-7,
the maximum value is corrected to read as 85 µA.
2. Module: Electrical Characteristics
For Parameter DI51d (Input Leakage Current) in
Table 30-9, the maximum value is corrected to
read as ±12 µA.
3. Module: Electrical Characteristics
For Parameter F21a (Internal RC Accuracy) in
Table 30-19, the values for the temperature range
of -40°C to +85°C are corrected to read as -30%
for minimum and +30% for maximum.
4. Module: Electrical Characteristics
For Parameter DA01 (Positive Output Differential
Voltage) in Table 30-46, the minimum value is
corrected to read as 0.8V.
5. Module: High-Temperature Electrical
Characteristics
A new table and specification, Table 31-6: I/O Pin
Input Specifications and Parameter DI51f (Input
Leakage Current, specific pins), are added to this
chapter. They are shown in Table 31-6 below.
All subsequent tables in the chapter are
renumbered accordingly.
6. Module: Electrical Characteristics
Specification F20 (FRC Accuracy) has changed to
reflect oscillator accuracy over three non-
overlapping temperature ranges; this supersedes
the previous specifications F20a and F20b. The
existing Table 30-18 is replaced in its entirety with
the new version (below).
Note: Corrections are shown in bold. Where
possible, the original bold text formatting
has been removed for clarity.
TABLE 31-6: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature: -40°C  TA  +150°C for High Temperature
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
I
IL Input Leakage Current
(1)
DI51f AN9 through AN12 — — ±15 AVSS  VPIN  VDD,
Pin at high-impedance,
-40°C  T
A  +150°C
Note 1: Negative current is defined as current sourced by the pin.
TABLE 30-18: AC CHARACTERISTICS: INTERNAL RC ACCURACY
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Characteristic Min Typ Max Units Conditions
Internal FRC Accuracy @ 7.3728 MHz
(1)
F20 FRC -3 — +3 % -40°C  TA  -10°C VDD = 3.0-3.6V
-2 — +2 % -10°C  T
A  +85°C VDD = 3.0-3.6V
-5 — +5 % +85°C  T
A 125°C VDD = 3.0-3.6V
Note 1: Frequency calibrated at +25°C and 3.3V. TUNx bits can be used to compensate for temperature drift.