Datasheet

dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
DS75018C-page 292  2011-2012 Microchip Technology Inc.
FIGURE 25-9: HIGH-SPEED PWM MODULE FAULT TIMING CHARACTERISTICS
FIGURE 25-10: HIGH-SPEED PWM MODULE TIMING CHARACTERISTICS
TABLE 25-28: HIGH-SPEED PWM MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Symbol Characteristic
(1)
Min. Typ. Max. Units Conditions
MP10 T
FPWM PWM Output Fall Time — 2.5 — ns
MP11 T
RPWM PWM Output Rise Time — 2.5 — ns
MP20
T
FD Fault Input  to PWM
I/O Change
——15ns
MP30
TFH Minimum PWM Fault Pulse
Width
8 — — ns DTC<10> = 10
MP31 T
PDLY Tap Delay 1.04 — — ns ACLK = 120 MHz
MP32 A
CLK PWM Input Clock — — 120 MHz See Note 2, Note 3
Note 1: These parameters are characterized but not tested in manufacturing.
2: This parameter is a maximum allowed input clock for the PWM module.
3: The maximum value for this parameter applies to dsPIC33FJ06GS101A/102A/202A/302 devices only.
FLTx
PWMx
MP30
MP20
PWMx
Note: Refer to Figure 25-1 for load conditions.
MP11 MP10